NuWire - IR Accessories

NCIR51 - IR Distribution Module
*Made specifically for use with NuVision branded Televisions and Monitors
One (1) NuControl RJ45 Input
One (1) IR IN w/Carrier 3.5mm jack
Five (5) 3.5mm IR Outputs withindependent gain adjustment
Overall dimensions: 84mm x 52mm x 22mm
Durable black rubberized finish
No external power supply needed
Includes 2 mounting screws and NuVision NCDB9RJ adapter

NCUCM - Bi-Directional Control Module
*Made specifically for use with NuVision branded Televisions and Monitors
One (1) NuControl RJ45 Input
One (1) RS-232 Input
One(1) IR IN No Carrier 3.5mm jack withadjustable gain
One(1) IR IN w/Carrier 3.5mm jack withadjustable gain
12V DC regulated Input 2.1mm coax jack. (Power supply sold separately)
Four (4) IR 3.5mm Outputs with independent gain adjustment v IR Output switches for Carrier or No Carrier.
Power indicator LED
Overall dimensions: 84mm x 52mm x 22mm
Durable black rubberized finish
Includes 2 mounting screws and NuVision NCDB9RJ adapter

NCDB9RJ - DB-9 to RJ45 Adapter
*Made specifically for use with NuVision branded Televisions and Monitors
Made for use with NuControl RS-232 ports on NuVision TV’s and Monitors or any other situation where a DB-9 to RJ-45 adapter is needed.

NCIRDA - Infrared IR Amplified Distribution module
12V DC power input via 2.1mm coax jack. (Power supply sold separately)
Push to connect 4-wire IR Sensor Input
+12V DC, GND, ST OUT, IR IN
One (1) 3.5mm jack IR Sensor IN
Two (2) LP (Low Power) IR 3.5mm jack Outputs
Two (2) LP/HP (Low Power/High Power) IR 3.5mm jack (switched) Outputs
One (1) STATUS IN 5-24V DC 2.1mm jack
POWER indicator LED
NET On/Off switch for multiple NCIRDAconnectivity
Overall dimensions: 84mm x 52mm x 22mm
Durable black rubberized finish
Includes 2 mounting screws

NCIRTB - Infrared IR Passive Emitter Terminal Block
One (1) High Power IR IN 3.5mm jack
One (1) High Power IR Loop Out 3.5mm jack
Ten (10) IR Outs via 3.5mm jacks
Overall dimensions: 84mm x 52mm x 22mm
Durable black rubberized finish
Includes 2 mounting screws

NCSPSM - Surface Mount IR Sensor
Uses filtering technology for disruptive CFLand ambient noise
Control range: ~30 ft and +/- 30º (dependson remote strength)
Requires 12V DC @ 6mA (sold separately)
Carrier Frequency Receive range:~28kHz - ~90kHz
Status and Activity LED’s
Overall dimensions: 65mm x 15mm x 14mm
118” 4-wire conductor cable w/3.5mmplug attached

NCSPFM - Flush-Mount IR Sensor
Uses filtering technology for disruptive CFLand ambient noise
Control range: ~30 ft and +/- 30º (dependson remote strength)
Requires 12V DC @ 6mA (sold separately)
Carrier Frequency Receive range:
~28kHz - ~90kHz
Overall dimensions:
118” 4-wire conductor cable w/3.5mm
plug attached

NCSPTM - Table Top IR Sensor
Single Infrared IR Sensor
Uses filtering technology for disruptive CFLand ambient noise
Control range: ~30 ft and +/- 30º (dependson remote strength)
Requires 12V DC @ 6mA (sold separately)
Carrier Frequency Receive range:~28kHz - ~90kHz
Status and Activity LED’s
Overall dimensions: 80mm x 25mm x 18mm
118” 4-wire conductor cable w/3.5mmplug attached

NCSPW - In Wall IR Sensor
Uses filtering technology for disruptive CFLand ambient noise
Control range: ~30 ft and +/- 50º (dependson remote strength)
Requires 12V DC (sold separately)
Carrier Frequency Receive range:~28kHz - ~90kHz
4-Conductor terminal strip
Status and Activity LEDs
Fits standard ‘J-Box”
Durable black rubberized finishedwall plate included

NCSXSM - Surface Mount IR Sensor with Plasma
Noise Filtering
Uses extreme plasma filtering technology for disruptive CFL and noise
Control range: ~50 ft and +/- 45º (dependson remote strength & noise)
Requires 12V DC @ 6mA (sold separately)
Carrier Frequency Receive range:~38kHz - ~60kHz
Status and Activity LED’s in Main module
Small IR sensor for discrete mounting
Overall dimensions: Main module 65mm x 15mm x 14mm
118” 4-wire conductor cable w/3.5mmplug attached

NCES - Single Head IR Emitter
Specially designed IR Emitter with matching docking cradle
For use with IR sensors and distribution modules
Includes adhesive backed, dual-sided clear tape for installation
Emitter head overall dimensions: 15mm x 8mm x 7mm
96” 2-wire conductor cable w/3.5mm plug attached

NCED - Dual Head IR Emitter
Specially designed 2-head IR Emitter Y cable withmatching docking cradles
For use with IR sensors and distribution modules
Includes adhesive backed, dual-sided clear tape for installation
Emitter head overall dimensions: 15mm x 8mm x 7mm
Two (2) 96” 2-wire conductor cables Y into single 3.5mm plug

NCESL - Single Head Emitter with Talkback LED
Specially designed IR Emitter with matching dockingcradle Talkback LED
For use with IR sensors and distribution modules
Includes adhesive backed, dual-sided clear tape for installation
Emitter head overall dimensions: 15mm x 8mm x 7mm
96” 2-wire conductor cable w/3.5mm plug attached

NCEDL - Dual Head Emitter with Talkback LED
Specially designed 2-head IR Emitter Y cable with matchingdocking cradles
Talkback LED
For use with IR sensors and distribution modules
Includes adhesive backed, dual-sided clear tape for installation
Emitter head overall dimensions: 15mm x 8mm x 7mm
Two (2) 96” 2-wire conductor cables Y into single 3.5mm plug

NCEB - High Output IR Emitter “Blaster”
Uses 2 high output LED IR emitters
Ensures good coverage
Allows control of an entire “stack” of gear with one IR emitter

NCEM - Micro IR Emitter
Specifically designed small emitter for placement inside a component
Keeps Emitter from being tampered with
Avoids visible emitter over component IR window

NCPS200 - AC Power Adapter
For use with NuVision and NuWire IR modules - NCUCM and NCIRDA
Input: 100-240V AC 50/60Hz
Output: 12V DC 200mA
Detachable AC power cord

NCPS1200 - AC Power Adapter
For use with NuVision and NuWire IR modules - NCUCM and NCIRDA
Input: 100-240V AC 50/60Hz
Output: 12V DC 1200mA
Detachable AC power cord

NCIRMM - IR Emitter extension Cable
8ft. 2-wire 3.5mm to 3.5mm plug IR extension cable

NCIRMF5 - IR Sensor Extension Cable
15ft. 4-conductor 3.5mm plug to 3.5mm jack

NCIR2M1F - IR Emitter Y-Cable
2-wire Y-Cable for combining two IR sources to one active output

Download Spec Sheet
IRSpecSheet.pdf

Home TVs All Models 52" LED DLP 65" LucidiumHDN LCD 52" LucidiumDCM LCD 47" LucidiumDCM LCD 42" LucidiumDCM LCD 37" Lucidium LCD 32" Lucidium LCD 26" Lucidium LCD 22" Lucidium LCD 47" LCM3 LCD 42" LCM3 LCD 37" NVU37HDU2 LCD 32" NVU37HDUM 01 LCD Accessories NuMount NuWire IR About Us Company Info Contact Us Support Tech Support FAQs Register Products Warranty Info Downloads News What's New Product Reviews HD Learning Center Locate A Dealer / Installer Become a NuVision Dealer

© 2007 NuVision US., Inc. | 7901 E. Pierce Street, Suite A Scottsdale, AZ 85257 | 480.970.1466 phn | 602.532.7965 fax
Home TVs Accessories About Us Support HD Learning Center Dealer Locator Dealer Login Site Map Privacy Policy